Folding a bouncy castle requires different steps depending on its type (inflatable/spring). The core principle is to first deflate/release the air, then fold and store it. Here are the detailed steps:
I. Folding Steps for an Inflatable Bouncy Castle
1. Complete Deflating: Open the deflation valve and allow the air to escape naturally. It is recommended to let it sit for 30 minutes to ensure all residual air is expelled (if it is still inflated when folding, deflate it again).
2. Assisted Deflating: Two people work together to step on the bouncy castle 3-5 times from the deflation end in the opposite direction to expel any remaining air (avoid sharp parts).
3. Initial Folding: Unfold the bouncy castle flat, fold it once along its long axis, then fold it again (avoid sharp folds that could damage the material).
4. Rolling Up and Shaping: Slowly roll the bouncy castle from the closed end towards the deflation end, tightening it at the deflation valve and securing it with the straps (to prevent loosening).
Folding Steps for a Spring/Steel Frame Bouncy Castle
1. Safety Check: First, check if the springs are loose and if the steel frame connections are secure. Only proceed after confirming there is no damage.
2. Removing the Support Legs:
• If the legs are foldable: Press the leg clips to fold the support legs towards the center of the frame;
• If the legs are fixed: Use a wrench to unscrew the leg screws and remove the support legs (note that screws should be stored separately).
3. Folding the Frame:
• Two-person operation: One person holds the center of the frame while the other slowly folds the frame to both sides (to prevent the springs from popping out);
• Single-person operation: First, tilt the frame to one side and fold it slowly using gravity (do not force it).
4. Storage and Securing: After folding, use straps to secure the frame to the trampoline and place it in a dedicated storage bag (avoid direct sunlight to prevent aging).
Precautions
1. Keep away from children during operation to prevent injury from springs popping out or the frame rebounding;
2. Avoid folding the inflatable trampoline (it may retain air and cause inflation); roll it up first;
3. Clean the trampoline of debris before each fold to prevent scratches;
4. For long-term storage, place in a dry and ventilated place and regularly check for rust.
